Quick answer
To set up WebP vs AVIF, confirm the input format/device, choose output settings, then run a small batch. AVIF is often smaller but slower to encode/less compatible; WebP is safer.
Why it matters
Validate on a small sample before running the whole batch.
Both can have fallbacks.
Step by step
- Confirm the target platform/browser supports WebP.
- Choose JPG/PNG, set WebP at 80% quality.
- Do not crush transparent/text images; zoom in on edges.
- Compare size and keep JPG/PNG fallbacks.
- Verify in the real browser/client after export.
Common mistakes
- Sending WebP to old systems that only support JPG/PNG.
- Compressing transparent images too hard, causing edge artifacts.
- Treating WebP as lossless and re-encoding repeatedly.
- Watching only size, not text sharpness.
Checklist
- Target supports WebP.
- Transparency/animation checked.
- Text/edges still sharp.
- JPG/PNG fallback kept.
- Original kept.
Key facts
- Both can have fallbacks.
- Choose by target browsers.
FAQ
How do I set up WebP vs AVIF?
To set up WebP vs AVIF, confirm the input format/device, choose output settings, then run a small batch. AVIF is often smaller but slower to encode/less compatible; WebP is safer.
How long does it take?
Usually 1-3 minutes; for intermittent issues, run 30 seconds and retest elsewhere.
Is data uploaded?
Runs locally and does not upload video/audio; extensions may still read the page.
Source: AVIF