Home/Answers/WebP vs AVIF
WEBP LAB / WebP vs AVIF

WebP vs AVIF for Beginners

For your first WebP vs AVIF task, do not change many settings: run defaults once, then adjust one item at a time.

Updated 2026-10-31About 3 minLocal test
Quick answer

For your first WebP vs AVIF task, do not change many settings: run defaults once, then adjust one item at a time. AVIF is often smaller but slower to encode/less compatible; WebP is safer.

Why it matters

Change one variable at a time so you know which setting matters.

Both can have fallbacks.

Step by step

  1. Confirm the target platform/browser supports WebP.
  2. Choose JPG/PNG, set WebP at 80% quality.
  3. Do not crush transparent/text images; zoom in on edges.
  4. Compare size and keep JPG/PNG fallbacks.
  5. Verify in the real browser/client after export.

Common mistakes

  • Sending WebP to old systems that only support JPG/PNG.
  • Compressing transparent images too hard, causing edge artifacts.
  • Treating WebP as lossless and re-encoding repeatedly.
  • Watching only size, not text sharpness.

Checklist

  • Target supports WebP.
  • Transparency/animation checked.
  • Text/edges still sharp.
  • JPG/PNG fallback kept.
  • Original kept.

Key facts

  • Both can have fallbacks.
  • Choose by target browsers.

FAQ

How do I start with WebP vs AVIF?

For your first WebP vs AVIF task, do not change many settings: run defaults once, then adjust one item at a time. AVIF is often smaller but slower to encode/less compatible; WebP is safer.

How long does it take?

Usually 1-3 minutes; for intermittent issues, run 30 seconds and retest elsewhere.

Is data uploaded?

Runs locally and does not upload video/audio; extensions may still read the page.

Source: AVIF